Newsletter Archives
-
Setting up your own cloud
HARDWARE DIY
By Ben Myers
I began a pilot project to see what a NAS (Network Attached Storage) computer could do to improve data backup and management here.
We have the usual collection of flash memory sticks and USB drives — and maybe, just maybe, we are not proactive with saving important information. It makes no sense to pay an annual rental for a Windows server license. There are several Linux distributions built for the specific purpose of hosting a NAS. Each of them, once installed, provides administration through the browser of a computer connected to one’s local area network.
Sounds easy, doesn’t it?
Read the full story in our Plus Newsletter (20.26.0, 2023-06-26).
-
Storage Spaces or Intel Rapid Storage?
HARDWARE DIY
By Will Fastie
My plan to use Storage Spaces on Opal hit a speed bump.
In my recent article Windows Storage Spaces (2023-05-22), I described my experiment with Opal, in which I decided to replace the RAID array created by Intel Rapid Storage with the same type of array created by Storage Spaces. My reaction was generally positive, although I did complain about the UI.
My opinion has changed. I’ll be reverting to Intel Rapid Storage.
Read the full story in our Plus Newsletter (20.24.0, 2023-06-12).
-
Windows Storage Spaces
HARDWARE DIY
By Will Fastie
I decided to try Storage Spaces on Opal, just to see what it would be like.
It’s a mixed bag. On the one hand, it’s less technically challenging than the Intel Rapid Storage Technology (RST) solution that lives partly in UEFI and partly in a Windows driver. On the other hand, it’s a work in progress, with some confusing configuration steps.
Read the full story in our Plus Newsletter (20.21.0, 2023-05-22).
-
The pros and cons of RAID 1
ISSUE 20.18 • 2023-05-01 HARDWARE
By Will Fastie
Revisiting an old friend, it’s time to update our thinking about RAID 1.
In our all-too-brief time working together, Fred Langa and I had only one point of disagreement — RAID (redundant array of inexpensive drives). Our bone of contention dealt with RAID level 1, the “mirror.” That’s the focus of this, our spring bonus edition of the newsletter.
Following this brief explanation, I’ll provide an update on the RAID situation with two of my PCs, Onyx and Opal.
Read the full story in our Plus Newsletter (20.18.0, 2023-05-01).
-
Fixing Onyx’s RAID 1 failure
HARDWARE DIY
By Will Fastie
Before I was able to decommission Onyx, my daily driver desktop PC, one of my hard drives failed. Hard.
Why the hard failure? Because I didn’t take my own advice — to replace hard drives every five years. The two Seagate drives in Onyx’s RAID 1 array were built in 2014 and put into service in 2015.
One of the drives failed nine months ago, so it lasted seven years — two years later than when I should have replaced it. Fortunately, Onyx is modern enough to have a good RAID system, from Intel. The fix was remarkably easy and, for the most part, automated.
Read the full story in our Plus Newsletter (20.18.0, 2023-05-01).
-
Configuring RAID 1 for Opal
HARDWARE DIY
By Will Fastie
The last stumbling block in my quest to bring Opal, my new desktop PC, online has been resolved.
Back when I was building Opal, my new PC to run Windows 11, I ran into a problem configuring two 6TB drives as a RAID 1 array. I struggled with that, which surprised me because it was relatively easy setting up the mirror on my original box, Onyx.
I let Opal lie fallow. My excuse was that my wife had acquired her Lenovo Yoga, which was happily running Windows 11 Pro. That gave me access to a machine when I needed to deal with a Windows 11 topic for this newsletter. The delay that ensued turned out to have been a good thing.
Read the full story in our Plus Newsletter (20.18.0, 2023-05-01).
-
RAID 0 error = Total data loss!
LANGALIST
By Fred Langa
RAID — Redundant Array of Inexpensive Disks — is an old technology that offers few real benefits on today’s standard PCs — but man, does it have drawbacks!
Today’s first reader-submitted letter illustrates the case. A system problem rendered essentially all the user’s data inaccessible and unrecoverable, across the entire RAID array!
Read the full story in the AskWoody Plus Newsletter 18.15.0 (2021-04-26).