Replies

There appears to be no way to change the DNS settings, so your router is doing unusual things.
Have you preformed a factory reset on the router?

cheers, Paul

I’ll talk to the ISP people…will up date the outcome
thanks
sam

Can you tell us the DHCP server settings from your router?

cheers, Paul

no problem:
DHCP Server Yes No
Starting Local Address
192.168.1.10

Number of CPEs
245
Lease Time
3600
Apply
DHCP Clients
MAC Address IP Address Subnet Mask Duration Expires Select
6e2e85ffffff 192.168.001.011 255.255.255.000 D:00 H:01 M:00 S:00 Sun Aug 14 10:49:12 2016
50e549d5a538 192.168.001.013 255.255.255.000 D:– H:– M:– S:– *** STATIC IP ADDRESS **

Current System Time: Sun Aug 14 10:14:58 2016
Force Available

no another box. only ISP’s one router. which router set up is of concern? the basic one?
BTW, configuring the TCP for static ip address does the job. no more release/renew need but, I know it should be auto…and I did not find the fix yet.
this the router set up:
Network Configuration
LAN
IP Address:
192.168.1.1
MAC Address d8:6c:e9:00:b2:66
Interface/Prefix
None Specified
WAN
IP Address: 5.29.xxx.77
MAC Address: d8:6c:e9:00:b2:64
Duration: D: 00 H: 22 M: 49 S: 15
Expires: Sun Aug 14 20:08:15 2016
IPv4 DNS Servers 213.xx.2.5
213.xx.22.5

Release WAN Lease Renew WAN Lease

WAN Connection Type
Ipv4 MTU Size
0
‎(256-1500 octets, 0 = use default)‎
Restore Factory Defaults Yes No
Apply
Reboot

after restart:
Windows IP Configuration

Host Name . . . . . . . . . . . . : muli2
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Atheros AR8151 PCI-E Gigabit Ethernet Con
troller (NDIS 6.20)
Physical Address. . . . . . . . . : 50-E5-49-D5-A5-38
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.1.13(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : שבת 13 אוגוסט 2016 18:16:30
Lease Expires . . . . . . . . . . : שבת 13 אוגוסט 2016 18:24:00
Default Gateway . . . . . . . . . : 192.168.0.50
DHCP Server . . . . . . . . . . . : 192.168.1.10
DNS Servers . . . . . . . . . . . : 192.168.0.50
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.{AC62721A-B84D-45C0-96D5-51CC863227C9}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

C:>

Event view 13/8/2016
Your computer was not able to renew its address from the network (from the DHCP Server) for the Network Card with network address xxxx. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server

I guess that the wireless device (keyboard, mouse) update issue does not interfere with connectivity to the net, does it?
I have updated o.k.
still did not resolve the release/renew issue…I might insert at START a batch file that will do for me the job but this is a working around the problem…
sam

Try reinstalling the driver, but I’ve seen where when other machines haven’t had a problem, doing a power cycle on the router has resolved.

To power cycle, shutdown the computer, modem (if applicable) and router then disconnect all cables for about 2 mins.

Reconnect the cables, switch just the modem on (if applicable), wait until all lights are on then do the same for the router.

Then see if problem is resolved.

If not, go start – type ncpa.cpl and press enter – right click on whichever adapter you are using – select Properties and uncheck the box for (TCP/IPv6) – OK

Go to Device Manager/View/Show hidden devices – expand Network adapters and check to see if you have the MS Virtual adapter listed.

(While you are in there you’ll probably see incremented MS ISATAP adapters – right click on the incremented ones and select Uninstall).

The Virtual adapter can cause connectivity problems and you only need it if you are using a VPN.

To turn this off (uninstall), open a command prompt as an admin by going Start – type cmd – right click on cmd – select Run as administrator – accept the UAC and enter –

netsh wlan set hostednetwork mode=disallow

shutdown /r /t 00

That last cmd will effect an immediate restart so you’ll be able to see if the release and renew cmds are still required, if reinstalling the driver didn’t help.

following your instructions:
1. power cycle – failed
2. no connection but ping to router o.k
3. TCP/IP6- unchecked
4. netsh wlan….done
5.reboot- no connection
6. release – renew magic
ipconfiguration before “release/renew”:

Windows IP Configuration

Host Name . . . . . . . . . . . . : muli2
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Atheros AR8151 PCI-E Gigabit Ethernet Con
troller (NDIS 6.20)
Physical Address. . . . . . . . . : 50-E5-49-D5-A5-38
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.1.13(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : שבת 13 אוגוסט 2016 00:44:35
Lease Expires . . . . . . . . . . : שבת 13 אוגוסט 2016 00:47:34
Default Gateway . . . . . . . . . : 192.168.0.50
DHCP Server . . . . . . . . . . . : 192.168.1.10
DNS Servers . . . . . . . . . . . : 192.168.0.50
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter isatap.{AC62721A-B84D-45C0-96D5-51CC863227C9}:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

where can I go further?
Tx
sam

is this one is the incremented MS ISATAP adapter you mentioned?
45275-isatap

thanks for the detailed and systematic reply. I’ll go from the easy one to the more complicated. i’ll update.
sam

Thanks. the point is that the 2nd pc I own (win 10) is receiving IP with no problem from the same router.
Sam

Thanks for your reply. I’d try to uninstall kies and let win struggle. The s2 usb mode is mtp. I can see s2 showing up in explorer for few seconds and than a yellow triangle in the device manager usb hubs sayng that this driver is not recognized. Truely frustrating.
Sam

Tx but….the only win app that can show multipage tiff file is the photo manager that unfortunately won’t allow to print a single page but the whole file. I found a solution with a 3td party app -IRfanviewer freeware.

you might use the virtual printer named PDF Factory. once installed you can print as many files as you desire and it collects in one pdf file that you can then print, save, mail, fax

try an efficient friendly free sync app – MyPhoneExplorer – at the google play store
http://www.fjsoft.at/en/downloads.php