I assembled a PC using an Enlight 72500AZ case with an ECS K7S5A mobo (with an AMD Athlon 2000 CPU). Got nearly everything together and works fine (had to swap the motherboard, but it all works now).
However, I cannot figure out the connection to the front USB ports. The motherboard has a USB header that shows pins 1. Verg_FP_USBPWR0, 3. USB_FP_P0-, 5. USB_FP_P0+, 7. Ground (Matches for pins 2, 4, 6, 8, too). The case connector is labeled, but no help to match. One Single pin, unmarked, and a three-pin connector labeled VCC D+. I tried the single connector on header 1 and on header 7, with the three connector on the other three header pins. Either way, no USB signal comes from the front of the case. (I used a USB mouse, and it works fine on the backside USB ports). What (simple, easy thing) am I doing wrong?
Otherwise, overall, the case/motherboard combo works very well, lots of room, and the drives are all designed to slide right into the case.
