May I add another HD to my tower?

Topic

New Reply

I’ve had my current custom built PC for over 3 years now. I currently Have 2 SSD and 1 HD drives in my tower presently. I would like to know if I can add any others to it. Mainly HD(s). I have a Thermaltake https://www.thermaltakeusa.com/v100.html V100 tower. I would like any help that I can get.B350M-MORTAR

Reply | Quote

Replies

Rush2112 wrote:

I would like to know if I can add any others to it.

If you have available SATA ports and drive bays, yes you can.  You’ll need to format the HDD.

Always create a fresh drive image before making system changes/Windows updates; you may need to start over!

We all have our own reasons for doing the things that we do with our systems; we don't need anyone's approval, and we don't all have to do the same things.

We were all once "Average Users".

Computer Specs

Reply | Quote

How do I determine if I have available SATA ports and drive bays? I am not familiar with computer hardware. Would it be visible when I look inside?

Reply | Quote

So the V100 is just a housing …. An expert should be able to help with the specs from the (Design Tab) V100 Housing Link you gave. Below seems relevant although which motherboard and other components you used would appear to be equally important.

W10 Pro 22H2 / Hm-Stdnt Ofce '16 C2R / Macrium Pd vX / GP=2 + FtrU=Semi-Annual + Feature Defer = 1 + QU = 0

Reply | Quote

B350M-MORTAR

That is my motherboard that’s installed currently.

Reply | Quote

This may help you:

https://www.reddit.com/r/MSI_Gaming/comments/okz7cv/how_many_ssdhdd_slots_does_msi_b350m_mortar_have/?rdt=50596

I assume that you did not build this PC yourself(?). Did you have it built by a local shop or did you order it from an online custom PC builder?

Reply | Quote

I had it built by a local store. I just don’t know the first thing when it comes to adding on anything to it. I guess you could call me a novice at best.

Reply | Quote

Rush2112 wrote:

I had it built by a local store.

Then they should be able to help you with your decisions and do the installation and HDD\SSD prep for you if you decide to proceed. It’s at least worth having a chat with them if you were happy with your experience with them when they built the PC for you.

 

Reply | Quote

The simple math says if you have 4 SATA ports and 3 current drives, you’ve got one SATA port left for an HDD. IF one SSD is an M.2, then two seem available for HDD.

The B350-M PDF Manual (diagram) Pg 23/84 shows the 4 SATA ports on the Right Lower half of the board and the M.2 slot more towards Center from that area. See link and decide how far you can go before getting the same store involved…

B350-M Manual

W10 Pro 22H2 / Hm-Stdnt Ofce '16 C2R / Macrium Pd vX / GP=2 + FtrU=Semi-Annual + Feature Defer = 1 + QU = 0

1 user thanked author for this post.

Steve S.

Reply | Quote

Further to CraigS26’s comment, you will need to get SATA data cables for any new HDDs as shown on page 1 of that manual and further details on page 8, fig. 2.  Plug one end into the SATA connector on the motherboard as shown on page 8, fig. 3 and the other end into the HDD as shown on page 8, fig. 4.

You will also need to check your power supply to see if it has any additional ports and cables designated for powering SATA drives. See page 8, figure 5.

If your case has extra places to mount the HDDs, the power supply has the capacity to connect more SATA devices and you obtain the needed cables, you should be able to hook it all up (with power shut off of course), then restart the computer and format the drives.

Win10 Pro x64 22H2, Win10 Home 22H2, Linux Mint + a cat with 'tortitude'.

Reply | Quote

I after careful consideration have decided to forego the possible 4th Drive. I am simply going to go another route all together. I will save this information. Should I decide to add another HDD.

Reply | Quote